Constituents:Nutrient Sub Module (NSM) Constituents, Project Cards

From Gsshawiki
Revision as of 16:36, 22 July 2013 by Csmemoe (talk | contribs)

Jump to: navigation, search

There are many project card that affect the running, reading, and writing of the NSM constituents. Much of the initialization of states is done through the NSM mapping tables, both the grid and stream mapping tables.

Project File Cards - Optional

General

Card Input Req'd for Nutrients Comments
SOURCEFILE  "filename.src"
filename.src N describes point and non-point loadings.
See the section on point and non-point loading for more info on this file.
OV_DISPERSION  [value]
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values.


Soils Initialization

These card are required to change the default loadings of the NSM soil cells.

Card Input Req'd for Nutrients Comments
SOILS_NSM_P
none N Initialize cell loadings from mapping table values
SOILS_NSM_N
none N Initialize cell loadings from mapping table values
SOILS_NSM_C
none N Initialize cell loadings from mapping table values


Overland Initialization

Values of constituents in water produced by hotstart or init_cell_elev cards.

Card Input Req'd for Nutrients Comments
OV_INIT_NO2
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_NO3
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_NH4
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_ON
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_OP
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_DP
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_ALG
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_CBOD
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_INIT_DO
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_DOC_INIT
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.
OV_DOC_FOC
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in mg/l.


Stream Initialization

These card initialize the concentrations and masses in the channel nodes when a simulation is running from a hot start.

Card Input Req'd for Nutrients Comments
ST_MAPPING_TABLE
filename.smt N Mapping table for streams.
ST_INIT_NO2
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_NO3
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_NH4
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_ON
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_OP
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_DP
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_PO4
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_ALG
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_CBOD
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.
ST_INIT_DO
none, uniform value, or filename.ext N If blank, use mapping table. If filename, apply grid of values. Value is in kg per cell.


Overland Nutrient Output

These output files will produce gridded data sets of the constituents. Both mass and concentration will be produced.

Card Input Req'd for Nutrients Comments
TOTAL_OV_N
filename.ton or path N gridded output of total N mass and concentration (will add .mass and .conc)
TOTAL_OV_P
filename.top or path N gridded output of total P mass and concentration (will add .mass and .conc)
OUT_OV_NO2
filename.on2 or path N gridded output of overland NO2 mass and concentration (will add .mass and .conc)
OUT_OV_NO3
filename.on3 or path N gridded output of overland NO3 mass and concentration (will add .mass and .conc)
OUT_OV_NH4
filename.on4 or path N gridded output of overland NH4 mass and concentration (will add .mass and .conc)
OUT_OV_ON
filename.oon or path N gridded output of overland ON mass and concentration (will add .mass and .conc)
OUT_OV_OP
filename.oop or path N gridded output of overland OP mass and concentration (will add .mass and .conc)
 OUT_OV_DP
filename.odp or path N gridded output of overland DP mass and concentration (will add .mass and .conc)
OUT_OV_ALG
filename.oal or path N gridded output of overland Algae mass and concentration (will add .mass and .conc)
OUT_OV_CBOD
filename.ocb or path N gridded output of overland CBOD mass and concentration (will add .mass and .conc)
OUT_OV_DO
filename.odo or path N gridded output of overland DO mass and concentration (will add .mass and .conc)


Stream Nutrient Output

These output card will produce link/node data sets of the constituents specified. Both mass and concentration will be produced.

Card Input Req'd for Nutrients Comments
TOTAL_CHAN_N
filename.tcn N Output total N in the channels, will add .mass and .conc
TOTAL_CHAN_KN
filename.ckn N Output Kejldahl N in the channels, will add .mass and .conc
TOTAL_CHAN_P
filename.tcp N Output total phosphorous in the channels, will add .mass and .conc
OUT_ST_NO2
filename.cn2 N Output nitrite mass and concentration in the channels, will add .mass and .conc
OUT_ST_NO3
filename.cn3 N Output nitrate mass and concentration in the channels, will add .mass and .conc
OUT_ST_NH4
filename.cn4 N Output ammonia mass and concentration in the channels, will add .mass and .conc
OUT_ST_ON
filename.con N Output organic nitrogen mass and concentrations in the channel, will add .mass and .conc
OUT_ST_OP
filename.cop N Output organic phosphorous mass and concentrations in the channel, will add .mass and .conc
OUT_ST_DP
filename.cdp N Output dissolved phosphorous mass and concentrations in the channel, will add .mass and .conc
OUT_ST_ALG
filename.cal N Output channel algae mass and concentrations, will add .mass and .conc
OUT_ST_CBOD
filename.ccb N Output channel CBOD mass and concentrations, will add .mass and .conc
OUT_ST_DO
filename.cdo N Output channel dissolved oxygen mass and concentrations, will add .mass and .conc


Nutrient Loadographs

These output cards will create time series of mass at all of the specified input hydrograph locations.

Card Input Req'd for Nutrients Comments
OUT_HYD_NO2
filename.hn2 N Output loadograph of nitrite at outlet and interior gages (input hydrograph locations)
OUT_HYD_NO3
filename.hn3 N Output loadograph of nitrate at outlet and interior gages (input hydrograph locations)
OUT_HYD_NH4
filename.hn4 N Output loadograph of ammonia at outlet and interior gages (input hydrograph locations)
OUT_HYD_ON
filename.hon N Output loadograph of organic nitrogen at outlet and interior gages (input hydrograph locations)
OUT_HYD_OP
filename.hop N Output loadograph of organic phosphorous at outlet and interior gages (input hydrograph locations)
OUT_HYD_DP
filename.hdp N Output loadograph of dissolved phosphorous at outlet and interior gages (input hydrograph locations)
OUT_HYD_ALG
filename.hal N Output loadograph of algae at outlet and interior gages (input hydrograph locations)
OUT_HYD_CBOD
filename.hcb N Output loadograph of CBOD at outlet and interior gages (input hydrograph locations)
OUT_HYD_DO
filename.hdo N Output loadograph of dissolved oxygen at outlet and interior gages (input hydrograph locations)

GSSHA User's Manual

12 Mapping Table
12.1     File Description
12.2     Index Maps
12.3     Grid-based Mapping Tables
12.4     ID Line Format
12.5     Example Mapping Table File
12.6     Stream Mapping Tables
12.7     Sediment Erosion Mapping Tables
12.7     Constituent Mapping Tables