Project File:Subsurface Drainage Network – Optional

From Gsshawiki
Revision as of 18:50, 4 October 2018 by Cdowner (talk | contribs) (3.12.3 Output Cards)

Jump to: navigation, search

Subsurface drains can be simulated with either SUPERLINKS and/or a simple link/node routing package. The inputs are similar

3.12.1 Specifying the Methods

The following card is REQUIRED for the simulation of SUPERLINK subsurface drains.

Card Argument Description
STORM_SEWER
filename.spn Card specifies that subsurface drainage be performed and identifies the input file that describes the newtork connectivity and physical description.

The following card is REQUIRED for the simulation of non-SUPERLINK subsurface drains.

Card Argument Description
STORM_DRAIN
filename.dpn Card specifies that subsurface drainage be performed and identifies the input file that describes the newtork connectivity and physical description.

3.12.2 Optional Inputs

The following cards are optional for the simulation of SUPERLINK subsurface drains.

Card Argument Description
GRID_PIPE
filename.gpi File that contains the information needed to link the network to the groundwater model. Required when simulating tile drains.
HIGH_HEAD_RELEASE
none Allow flow back to the overland from the storm drains during system surcharge.
SUPERLINK_C_OPT
none Specifies that GSSHA assigns the proper node spacing for within superlinks.
SUPERLINK_DRAINMOD
none Specifies the method used in DRAINMOD be used to compute flows into tile drains.

The following cards are optional for the simulation of non-SUPERLINK subsurface drains.

Card Argument Description
DRAIN_GRID_PIPE
filename.dpi File that contains the information needed to link the network to the groundwater model. Required when simulating tile drains.
SUPERLINK_DRAINMOD
none Specifies the method used in DRAINMOD be used to compute flows into tile drains.

3.12.3 Output Cards

The following cards are optional for the simulation of SURERLINK subsurface drains.

Card Argument Description
SUPERLINK_JUNC_LOCATION
filename File that defines the junctions for output.
SUPERLINK_NODE_LOCATION
filename File that defines the nodes for output.
SUPERLINK_JUNC_FLOW
filename File that contains the time series output data for the junctions listed in SUPERLINK_JUNC_LOCATION.
SUPERLINK_NODE_FLOW
filename File that contains the time series output data for the nodes listed in SUPERLINK_NODE_LOCATION.

The following cards are optional for the simulation of non-SURERLINK subsurface drains.

Card Argument Description
DRAIN_OUTPUT
filename File that contains the time series output data for all nodes in the framework.

GSSHA User's Manual

3 Project File
3.1     Required Inputs
3.2     Mapping Table – Optional
3.3     Overland Flow – Required
3.4     Interception – Optional
3.5     Rainfall Input and Options – Required
3.6     Infiltration – Optional
3.7     Channel Routing – Optional
3.8     Continuous Simulations – Optional
3.9     Saturated Groundwater Flow – Optional
3.10     Soil Erosion – Optional
3.11     Constituent Transport – Optional
3.12     Subsurface Drainage Network – Optional
3.13     Output Files – Required