Difference between revisions of "Gridded Surface Subsurface Hydrologic Analysis"
(60 intermediate revisions by 3 users not shown) | |||
Line 3: | Line 3: | ||
The GSSHA™ Wiki is the best source for up to date information on the GSSHA™ model. In the last few years many new features have been added to the GSSHA™ model. Many of these features were developed or released after the publication of the primer and manual. One of the main purposes of the GSSHA™ Wiki is to keep the documentation up to date with the model development. | The GSSHA™ Wiki is the best source for up to date information on the GSSHA™ model. In the last few years many new features have been added to the GSSHA™ model. Many of these features were developed or released after the publication of the primer and manual. One of the main purposes of the GSSHA™ Wiki is to keep the documentation up to date with the model development. | ||
− | If you are an experienced GSSHA™ user you may still find some model features missing from the site | + | If you are an experienced GSSHA™ user you may still find some model features missing from the site. Currently we are on release version 7.13, which is now available as a LINUX version. Earlier versions of the model are also no longer supported and are thus not recommended. Version 7.13 is supported by WMS 11.1 and 10.1 and WMS 11.1 or 10.1 is recommended for use with this version. |
As many users may be aware, support of features in WMS typically lags behind development of GSSHA™. This is necessary in that we must settle on final GSSHA™ inputs and outputs before we ask them to be added to WMS. While we strongly encourage GSSHA™ users to use WMS for pre and post processing, users should be aware that many GSSHA™ models, especially GSSHA™ models with advanced features, must be at least partially developed outside of WMS. In addition to WMS, we have developed several utilities to assist in the development of GSSHA™ inputs. These utilities are linked to this site as well. The documents provided here describe the actual inputs to the GSSHA™ model and should be consulted when there are questions about inputs, whether developed from WMS or by other means. When in doubt, refer to Users Manual section on this wiki, which contains the most up to date information on model inputs. | As many users may be aware, support of features in WMS typically lags behind development of GSSHA™. This is necessary in that we must settle on final GSSHA™ inputs and outputs before we ask them to be added to WMS. While we strongly encourage GSSHA™ users to use WMS for pre and post processing, users should be aware that many GSSHA™ models, especially GSSHA™ models with advanced features, must be at least partially developed outside of WMS. In addition to WMS, we have developed several utilities to assist in the development of GSSHA™ inputs. These utilities are linked to this site as well. The documents provided here describe the actual inputs to the GSSHA™ model and should be consulted when there are questions about inputs, whether developed from WMS or by other means. When in doubt, refer to Users Manual section on this wiki, which contains the most up to date information on model inputs. | ||
− | |||
− | |||
− | |||
− | |||
GSSHA™ is developed and maintained by the US Army Engineer Research and Development Center (ERDC) Hydrologic Modeling Branch, in the Coastal and Hydraulics Laboratory, see: | GSSHA™ is developed and maintained by the US Army Engineer Research and Development Center (ERDC) Hydrologic Modeling Branch, in the Coastal and Hydraulics Laboratory, see: | ||
*http://chl.erdc.usace.army.mil/gssha | *http://chl.erdc.usace.army.mil/gssha | ||
− | If you are not familiar with GSSHA™ see the overview tab on the top left hand side of your screen to get a feel for what GSSHA™ is and what applications it might be appropriate for. | + | If you are not familiar with GSSHA™ see the overview tab on the top left hand side of your screen to get a feel for what GSSHA™ is and what applications it might be appropriate for. |
− | |||
− | + | A one page information sheet is available here *[[media:GSSHA_IS.pdf| GSSHA™ Information Sheet]]. | |
− | + | The GSSHA storyboard can be found here: *[[media:GSSHA_storyboard.pdf| GSSHA storyboard]] | |
− | |||
− | + | For more information about the GSSHA™ model, it's formulation, and it's applicability, contact me at [mailto:charles.w.downer@usace.army.mil charles.w.downer@usace.army.mil]. | |
+ | For more information about WMS and using WMS to construct a GSSHA™ model and visualize results, contact Aquaveo at:*http://www.aquaveo.com/wms-learning. | ||
+ | As of the year 2013, GSSHA has been approved by FEMA for hydrologic modeling, and has been added to the list of approved models on the FEMA site *http://www.fema.gov/national-flood-insurance-program-flood-hazard-mapping/hydrologic-models-meeting-minimum-requirement#1. | ||
− | + | == GSSHA DLL and BMI Support == | |
− | |||
− | |||
+ | News on GSSHA version 8.0: We are finalizing the verification of the new code before we publish the new release version. One of the exciting new features of version 8.0 is that the code has been refactored into a library that allows programmatic access to the gssha simulation processes. Further, we have worked to include Basic Model Interface (BMI) support so that it can be a part of BMI-based modeling frameworks, such as NOAA's NextGen system. If you are interested in helping us test these new features, please contact me at [mailto:Aaron.R.Byrd2@usace.army.mil Aaron.R.Byrd2@usace.army.mil]. These new simulation interaction features will be experimentally released in 8.0 while we test and document them. | ||
+ | -Aaron | ||
Line 55: | Line 51: | ||
Note: GSSHA currently supports file names (including path and file name) with lengths less than or equal to 128 characters. If GSSHA tutorial files are placed in a directory with a path that causes the combined path and file name to exceed 128 characters, then GSSHA will not run. | Note: GSSHA currently supports file names (including path and file name) with lengths less than or equal to 128 characters. If GSSHA tutorial files are placed in a directory with a path that causes the combined path and file name to exceed 128 characters, then GSSHA will not run. | ||
− | [ | + | [http://www.aquaveo.com/software/wms-learning-tutorials Download the latest GSSHA™ tutorials and data files here] |
[http://wmstutorials.aquaveo.com/Park_City_Tutorials.zip GSSHA™ Park City June 2008 training tutorials and data files (ZIP file, 65.4 MB)] | [http://wmstutorials.aquaveo.com/Park_City_Tutorials.zip GSSHA™ Park City June 2008 training tutorials and data files (ZIP file, 65.4 MB)] | ||
Line 62: | Line 58: | ||
[http://www.aquaveo.com/wms-learning Download tutorials and videos describing how to use WMS here] | [http://www.aquaveo.com/wms-learning Download tutorials and videos describing how to use WMS here] | ||
+ | |||
+ | === 2021 Workshop on Using GSSHA with PEST === | ||
+ | PEST is often used to calibrate GSSHA models. Here are the workshop files. | ||
+ | |||
+ | [[Media:GSSHA_PEST_Tutorial_2021.zip|GSSHA™ PEST 2021 Training Files]] ([https://pesthomepage.org/ PEST Homepage]) | ||
+ | |||
+ | === 2022 Workshop on Using GSSHA™ for Combined Coastal Storms === | ||
+ | GSSHA™ can be used for combined coastal storms (intense rainfall + storm surge). Here are the workshop files: | ||
+ | |||
+ | * [[media:gssha_course_announcement_flood.pdf|GSSHA™ Flood Simulation Course Announcement and Agenda]] | ||
+ | * [[media:BasicMaterials.zip| Basic Materials]] | ||
+ | * Day 1 [[media:TutorialsDay1.zip|tutorials]] and [[media:PresentationsPDFs_day1.zip|presentations]] | ||
+ | * Day 2 [[media:TutorialsDay2.zip|tutorials]] and [[media:PresentationsPDFs_day2.zip|presentations]] | ||
+ | * Required data for the course can be found here: http://www.aquaveo.com/software/wms-learning-tutorials | ||
+ | |||
+ | === 2023 Watershed Engineering with Nature (EWN) Design Workshop With WMS and GSSHA™ === | ||
+ | * [[Media:WMS_GSSHA_EWN.pdf | Class Information and Agenda]] | ||
+ | * Day 1 [[media:GSSHAWMSEWNDay1PresentationPDFs_day1.zip|presentations]] | ||
+ | * Day 2 [[media:SedimentTutorials_Sep2023.zip|Updated Sediment Tutorial]], [[media:RiverCaneTutorial.zip|River Cane Tutorial]], [[media:ParkCityBDAWetlands.zip|Example Beaver Dam Analog and Wetlands Model]] and [[media:GSSHAWMSEWNDay2PresentationPDFs_day2.zip|presentations]] | ||
+ | * Required data for the course can be found here: http://www.aquaveo.com/software/wms-learning-tutorials | ||
+ | |||
==[[Utility_Programs:Main|Utility Programs]]== | ==[[Utility_Programs:Main|Utility Programs]]== | ||
Line 74: | Line 91: | ||
| | | | ||
*[[Utility_Programs:Format_HMET Spreadsheet|Format_HMET]] | *[[Utility_Programs:Format_HMET Spreadsheet|Format_HMET]] | ||
+ | | width="50px" | | ||
|} | |} | ||
Revision as of 15:18, 10 October 2023
Welcome to the GSSHA™ Wiki!
The GSSHA™ Wiki is the best source for up to date information on the GSSHA™ model. In the last few years many new features have been added to the GSSHA™ model. Many of these features were developed or released after the publication of the primer and manual. One of the main purposes of the GSSHA™ Wiki is to keep the documentation up to date with the model development.
If you are an experienced GSSHA™ user you may still find some model features missing from the site. Currently we are on release version 7.13, which is now available as a LINUX version. Earlier versions of the model are also no longer supported and are thus not recommended. Version 7.13 is supported by WMS 11.1 and 10.1 and WMS 11.1 or 10.1 is recommended for use with this version.
As many users may be aware, support of features in WMS typically lags behind development of GSSHA™. This is necessary in that we must settle on final GSSHA™ inputs and outputs before we ask them to be added to WMS. While we strongly encourage GSSHA™ users to use WMS for pre and post processing, users should be aware that many GSSHA™ models, especially GSSHA™ models with advanced features, must be at least partially developed outside of WMS. In addition to WMS, we have developed several utilities to assist in the development of GSSHA™ inputs. These utilities are linked to this site as well. The documents provided here describe the actual inputs to the GSSHA™ model and should be consulted when there are questions about inputs, whether developed from WMS or by other means. When in doubt, refer to Users Manual section on this wiki, which contains the most up to date information on model inputs.
GSSHA™ is developed and maintained by the US Army Engineer Research and Development Center (ERDC) Hydrologic Modeling Branch, in the Coastal and Hydraulics Laboratory, see:
If you are not familiar with GSSHA™ see the overview tab on the top left hand side of your screen to get a feel for what GSSHA™ is and what applications it might be appropriate for.
A one page information sheet is available here * GSSHA™ Information Sheet.
The GSSHA storyboard can be found here: * GSSHA storyboard
For more information about the GSSHA™ model, it's formulation, and it's applicability, contact me at charles.w.downer@usace.army.mil.
For more information about WMS and using WMS to construct a GSSHA™ model and visualize results, contact Aquaveo at:*http://www.aquaveo.com/wms-learning.
As of the year 2013, GSSHA has been approved by FEMA for hydrologic modeling, and has been added to the list of approved models on the FEMA site *http://www.fema.gov/national-flood-insurance-program-flood-hazard-mapping/hydrologic-models-meeting-minimum-requirement#1.
GSSHA DLL and BMI Support
News on GSSHA version 8.0: We are finalizing the verification of the new code before we publish the new release version. One of the exciting new features of version 8.0 is that the code has been refactored into a library that allows programmatic access to the gssha simulation processes. Further, we have worked to include Basic Model Interface (BMI) support so that it can be a part of BMI-based modeling frameworks, such as NOAA's NextGen system. If you are interested in helping us test these new features, please contact me at Aaron.R.Byrd2@usace.army.mil. These new simulation interaction features will be experimentally released in 8.0 while we test and document them.
-Aaron
Contents
- 1 Welcome to the GSSHA™ Wiki!
- 2 GSSHA DLL and BMI Support
- 3 GSSHA™ FEMA Certification
- 4 GSSHA™ Training Course Information
- 5 GSSHA™ Software Primer
- 6 GSSHA™ User's Manual
- 7 GSSHA™ Tutorials
- 8 Utility Programs
- 9 Obtaining Data
- 10 GSSHA™ Bibliography
- 11 Test Cases
- 12 Wiki Editing Guidelines
- 13 GSSHA™ Download
- 14 Disclaimer
GSSHA™ FEMA Certification
GSSHA™ is now FEMA certified for National Flood Insurance Program studies! For more information see the FEMA NFIP Currently Accepted National Hydrologic Models
GSSHA™ Training Course Information
GSSHA™ Training courses are occasionally offered through the USACE and through Aquaveo. These courses are very interesting and fun and are normally offered once a year. Course attendees leave these courses with the information they need to build any type of GSSHA™ model that fits their needs and with a comprehensive understanding of the GSSHA™ model. Click here for updated information about the next GSSHA™ training course.
GSSHA™ Software Primer
This document is a primer for use of the Watershed Modeling System (WMS) interface with the physically based, distributed-parameter hydrologic model Gridded Surface Subsurface Hydrologic Analysis (GSSHA™). The primary purpose of this primer is to describe how the WMS interface is used to develop inputs and analyze output from the GSSHA™ model. This primer also provides a brief description of the GSSHA™ model, including the overall model formulation, processes that can be simulated, and input formats for files not supported by WMS.
GSSHA™ User's Manual
This document is the detailed user manual for GSSHA™. The last printed version is available here: *GSSHA Manual. Be aware the the printed version has not been updated since 2006 and that many features in the model have changed. Updates to the Manual are done on the wiki, which has the latest information on GSSHA™ features and file formats.
GSSHA™ Tutorials
Note: GSSHA currently supports file names (including path and file name) with lengths less than or equal to 128 characters. If GSSHA tutorial files are placed in a directory with a path that causes the combined path and file name to exceed 128 characters, then GSSHA will not run.
Download the latest GSSHA™ tutorials and data files here
GSSHA™ Park City June 2008 training tutorials and data files (ZIP file, 65.4 MB)
Download tutorials and videos describing how to use WMS here
2021 Workshop on Using GSSHA with PEST
PEST is often used to calibrate GSSHA models. Here are the workshop files.
GSSHA™ PEST 2021 Training Files (PEST Homepage)
2022 Workshop on Using GSSHA™ for Combined Coastal Storms
GSSHA™ can be used for combined coastal storms (intense rainfall + storm surge). Here are the workshop files:
- GSSHA™ Flood Simulation Course Announcement and Agenda
- Basic Materials
- Day 1 tutorials and presentations
- Day 2 tutorials and presentations
- Required data for the course can be found here: http://www.aquaveo.com/software/wms-learning-tutorials
2023 Watershed Engineering with Nature (EWN) Design Workshop With WMS and GSSHA™
- Class Information and Agenda
- Day 1 presentations
- Day 2 Updated Sediment Tutorial, River Cane Tutorial, Example Beaver Dam Analog and Wetlands Model and presentations
- Required data for the course can be found here: http://www.aquaveo.com/software/wms-learning-tutorials
Utility Programs
Obtaining Data
This section gives sample values for many of the parameters used in GSSHA™.
GSSHA™ Bibliography
Reports or papers where GSSHA™ was used.
Test Cases
Example projects: 10x10 Simulations, Project Simulations.
Wiki Editing Guidelines
Guidelines on how to edit this Wiki
GSSHA™ Download
Current release and research versions of the code can be downloaded here along with tutorial data.