Search results

Page title matches

• Output:Time Series Maps
  ...ediment flux. The project file cards required to write output time-series maps are listed in Section 3.11.3. ...not be directly read or edited. All maps are written every '''MAP_FREQ''' time steps.
  3 KB (564 words) - 20:55, 10 July 2018

Page text matches

• Overview:Modeling Process
  ...s). ''GSSHA'' has been coupled with ''WMS'' in an attempt to minimize the time required to create the needed inputs. ''WMS'' is also intended to aid in m ...th dialog boxes and distributed-parameter assignment with the use of index maps and the mapping tables.
  4 KB (635 words) - 20:05, 23 June 2008
• Overview:Modeling process
  ...s). ''GSSHA'' has been coupled with ''WMS'' in an attempt to minimize the time required to create the needed inputs. ''WMS'' is also intended to aid in m ...istributed-parameter assignment with the use of [[Mapping:Index_maps|index maps]] and the [[Mapping:Mapping_tables|mapping tables]].
  4 KB (646 words) - 23:11, 9 February 2010
• Pre-Processing:Editing the Grid to Correct Elevation Errors
  ...y. As a rule of thumb, the user must cross check the DEM with topographic maps of the area. Interpolating elevations from the DEM at one resolution to a ...ons are turned off. If the simulation terminates normally, overland depth maps can be examined to determine where water accumulates on the overland flow p
  6 KB (1,060 words) - 16:27, 21 December 2007
• Model Construction:Building a Basic GSSHA Simulation
  ...s are corrected, and then additional processes or inputs are added, one at time. The key is to successfully build a simple simulation, and then build upon ...omputing overland flow, the computa­tional time-step and total simulation time, and whether to activate certain model options such as channel routing, lon
  3 KB (422 words) - 20:35, 9 February 2010
• Model Construction:Global parameters
  ...omputing overland flow, the computa­tional time-step and total simulation time, and whether to activate certain model options such as channel routing, lon ...l button in the center bottom, is used to indicate the desired time-series maps that GSSHA can output, such as the depth of water on the overland flow plan
  1 KB (219 words) - 21:52, 23 July 2008
• Model Construction:Editing the grid to correct elevation errors
  ...y. As a rule of thumb, the user must cross check the DEM with topographic maps of the area. Interpolating elevations from the DEM at one resolution to a ...ons are turned off. If the simulation terminates normally, overland depth maps can be examined to determine where water accumulates on the overland flow p
  7 KB (1,090 words) - 21:44, 9 February 2010
• Post-Processing:Output control
  ...r determines the frequency of writing output raster maps or data sets. The time is measured in units of minutes. ...''WMS'' data set in binary or ASCII format, or a series of ''GRASS'' ASCII maps. Since this primer accompanies ''WMS'', it will be assumed that the data s
  2 KB (282 words) - 18:46, 7 May 2008
• Post-Processing:Data tree
  ===''Index Maps''=== ...Index Maps, that contains all of the index maps for the simulation. Index maps can then be treated like regular data sets; they can be contoured, renamed,
  5 KB (892 words) - 15:18, 17 April 2008
• Post-Processing:Post-Processing
  ...he channel network and in the 2-D grid. ''GSSHA'' can produce a series of maps that can be displayed in ''WMS'' containing surface depth and/or other resu
  772 bytes (124 words) - 15:17, 17 April 2008
• Template:GUM14
  =14.4 Time Series Data at Internal Locations= {{Output:Time Series Data at Internal Locations}}
  417 bytes (53 words) - 18:53, 20 May 2008
• File Formats:Project File Format
  | ''value'' || Y || overland and stream time step in seconds | filename.ts || N || read file containing time series; this is optional and it may be repeated to include several files
  26 KB (3,971 words) - 14:55, 13 October 2023
• ...te distributed data either from the Mapping Table file or from GRASS ASCII maps. ...hours difference between the time zone of the catchment and Greenwich Mean Time (e.g. –6 for EDT).
  12 KB (1,819 words) - 17:07, 21 December 2012
• ...ay be input using the Mapping Table file or with the series of GRASS ASCII maps using the cards below. ...ese may be input in the Mapping Table file or by providing two GRASS ASCII maps using the cards below.
  9 KB (1,226 words) - 19:40, 25 June 2010
• ...YDRO "filename.otl"</pre> || ''file name'' || Output file containing time series discharge at the catchment outlet. (m³/s default or, ft<sup>3</ ...T</pre> || ''none'' || Suppress printing of information to the screen each time step.
  11 KB (1,753 words) - 16:52, 24 June 2013
• Template:Nav14
  ....4 &nbsp;&nbsp;&nbsp; [[Output:Time Series Data at Internal Locations|Time Series Data at Internal Locations]] :: 14.6 &nbsp;&nbsp;&nbsp; [[Output:Time Series Maps|Time Series Maps]]
  612 bytes (76 words) - 17:25, 20 May 2008
• Surface Water Routing:Channel Routing
  ...ngitudinal, ''x'', direction are computed from depths, ''d'', at the ''n'' time level using the Manning equation for the head discharge relationship: ...compute nodal values of ''A'', ''d'', and wetted perimeter at the ''n+1'' time level. Calculations proceed from the upstream boundary to the downstream b
  60 KB (7,451 words) - 18:55, 26 April 2019
• Soil Erosion:Simulations with Soil Erosion
  ...will be same as in the '''OUTLET_SED_FLUX''' file, except there will be a series of data for each chosen output link/node pair. Data from the link/node pai Maps of the maximum sediment flux (cms) and the volumetric change (m3) can be ou
  20 KB (2,913 words) - 17:39, 15 June 2015
• Mapping Table:Mapping Table File
  ...assignment for project alternatives and future scenarios. By using index maps as the patterns for assigning parameters, many different input parameters f ...r process simulations from the Mapping Table file, and that detailed ASCII maps or uniform values of parameters will not be used.
  3 KB (466 words) - 18:17, 20 May 2008
• Mapping Table:Mapping Tables
  | pumping rate (if static) or time series index (if dynamic) || cms ...- Regular Cell<br>1 - Constant Slope<br>2 - Constant Specified Head<br>3 - Time Variable Specified Head<br>4 - Specified hydrograph (cfs)<br>5 - Specified
  39 KB (4,240 words) - 23:22, 27 September 2023
• Output:Time Series Maps
  ...ediment flux. The project file cards required to write output time-series maps are listed in Section 3.11.3. ...not be directly read or edited. All maps are written every '''MAP_FREQ''' time steps.
  3 KB (564 words) - 20:55, 10 July 2018

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)