Difference between revisions of "Project File:Output Files � Required"

Revision as of 21:00, 16 March 2011

3.12.1 Required Output

Card	Argument	Description
SUMMARY "filename.sum"	file name	Output file summarizing information on options selected, inputs read, simulation results, mass conservation, and warnings generated during the simulation.
OUTLET_HYDRO "filename.otl"	file name	Output file containing time series discharge at the catchment outlet. (m³/s default or, ft³/s if QOUT_CFS card is specified)

3.12.2 Optional Output

Card	Argument	Description
QOUT_CFS	none	Specifies outflow hydrograph ordinates in ft³/s. The default is m³/s.
QUIET	none	Suppress printing of information to the screen each time step.
SUPER_QUIET	none	Suppress all printing of information to the screen. Useful in calibration mode.
IN_HYD_LOCATION "filename.ihl"	file name	Name of input ASCII file containing the link/node pairs to write out hydrograph ordinates to the file specified by OUT_HYD_LOCATION.
OUT_HYD_LOCATION "filename.ohl"	file name	File name to output discharge (m³/s or ft³/s) every HYD_FREQ time steps, at locations specified in IN_HYD_LOCATION. REQUIRED if IN_HYD_LOCATION was specified.
OUT_DEP_LOCATION "filename.odl"	file name	File name to output time channel depths (m) every HYD_FREQ minutes at locations specified in the IN_HYD_LOCATION file.
OUTLET_SED_FLUX "filename.osl"	file name	File name to output outlet sediment flux (m³ s^-1) every HYD_FREQ minutes at the watershed outlet. Requires SOIL_EROSION.
IN_SED_LOC "filename.isl"	file name	Input file name containing link/node pairs to write sediment hydrograph to the file specified by OUT_SED_LOC. Requires SOIL_EROSION and CHAN_EXPLIC or DIFFUSIVE_WAVE.
OUT_SED_LOC "filename.osl"	file name	File name to output sediment flux (m³ s^-1) every HYD_FREQ minutes at internal catchment locations specified in the IN_SED_LOCATION file. REQUIRED if SOIL_EROSION and IN_SED_LOC card are specified.
IN_THETA_LOCATION "filname.itl"	table name	Name of input ASCII file that contains locations of cells to output moisture data every HYD_FREQ time steps.
OUT_THETA_LOCATION "filename.otl"	file name	Filename to output time series moisture data every HYD_FREQ time steps at cells specified in IN_THETA_LOCATION.
OUT_WELL_LOCATION "filename.igw"	file name	Name of input ASCII file containing location of observation wells. Values of groundwater head at each location in the file specified in OUT_WELL_LOCATION will be output every HYD_FREQ time steps in the GW_WELL_LEVEL file.
OUT_CON_LOCATION "filename.ocl"	file name	File name to ouput constituent concentrations (ppb) at locations specified in IN_HYD_LOC file every HYD_FREQ minutes. Requires CHAN_EXPLIC or DIFFUSIVE_WAVE, CHAN_CON_TRANS, and IN_HYD_LOCATION.
OUT_MASS_LOCATION "filename.oml"	file name	File name to ouput constituent mass flux (g s_-1) at locations specified in IN_HYD_LOC file every HYD_FREQ minutes. Requires CHAN_EXPLIC or DIFFUSIVE_WAVE, CHAN_CON_TRANS, and IN_HYD_LOCATION.
GW_WELL_LEVEL "filename.ogw"	file name	File name to output groundwater heads every HYD_FREQ time steps at locations specified in OUT_WELL_LOCATION.
STRICT_JULIAN_DATE	none	All time series data are output with strict Julian date.
OPTIMIZE "filename.opt"	filename	Filename to output optimization information: peak discharge and discharge volumes at the watershed outlet and at any points specified in the IN_HYD_LOCATION file for each storm event.
OPTIMIZE_SED		Card used to specify to output sediment data for optimization, peak discharge and discharge volume, instead of flow. Can be used with the OPTIMIZE card or in automated calibration mode.
PROJECT_PATH	directory path	Card used to specify the directory to put all default output files. Default is directory where GSSHA is executed from. If you use this card, all path names in your project file should be relative to the path specified with the PROJECT_PATH card.
REPLACE_PARAMS "filename.in"	filename	File containing the names and formats of variables to be replaced in the input files when operating in replacement mode. Must be used with REPLACE_VALS.
REPLACE_VALS "filename.in"	filename	File containing the values of variables in the REPLACE_PARAMS file. Used when operating in replacement mode. Must be used with REPLACE_PARAMS.

3.12.3 Optional Output Maps

Card	Argument	Description
MAP_FREQ ##	integer	Frequency (minutes) that output time-series maps are written to. REQUIRED only if output maps are specified.
MAP_TYPE ##	integer	Specifies the format of output maps: 0 Arc/Info ASCII maps. 1 WMS maps, ASCII (default). 2 WMS maps, binary. 4 XMDF maps (input and output). REQUIRED only if MAP_FREQ is required.
DISCHARGE [value]	filename or folder	Filename or folder to output MAP_TYPE maps of the overland discharge (m³/s) every MAP_FREQ time steps.
DEPTH [value]	file name or folder	Filename or folder to output MAP_TYPE maps of overland flow depth (m) every MAP_FREQ minutes. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\depth.####.asc" **
INF_DEPTH [value]	filename or folder	Filename or folder to output MAP_TYPE maps of cumulative infiltrated depth (m) every MAP_FREQ minutes. REQUIRES infiltration option. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\inf_dep.####.asc" **
SURF_MOIST [value]	filename or folder	Filename or folder to output MAP_TYPE maps of soil surface volumetric water content every MAP_FREQ minutes. REQUIRES infiltration option. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\smoist.####.asc" **
RATE_OF_INFIL [value]	file or folder	Filename or folder to output MAP_TYPE maps of infiltration rate (cm/h) every MAP_FREQ minutes. REQUIRES infiltration option. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\infil.####.asc" **
DIS_RAIN [value]	filename or folder	Filename or folder to output MAP_TYPE maps of spatially distributed rainfall rate (mm/h) every MAP_FREQ minutes. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\rain.####.asc" **
CHAN_DEPTH [value]	filename or folder	Filename to output link/node data sets of channel depth (m) every MAP_FREQ minutes. REQUIRES CHAN_EXPLIC or DIFFUSIVE_WAVE.
CHAN_DISCHARGE [value]	filename or folder	Filename to output link/node data sets of channel discharge (m³/s) every MAP_FREQ minutes. REQUIRES CHAN_EXPLIC or DIFFUSIVE_WAVE.
MAX_SED_FLUX [value]	filename or folder	Filename to output link/node data sets of total sediment flux (running) (cm³/s) every MAP_FREQ minutes. REQUIRES SOIL_EROSION.
GW_OUTPUT [value]	filename or folder	Filename to output MAP_TYPE maps of groundwater head (m) every MAP_FREQ minutes. REQUIRES WATER_TABLE. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\gw_head.####.asc" **
GW_RECHARGE_CUM [value]	filename or folder	Filename to output MAP_TYPE maps of cummulative groundwater recharge (cm) every MAP_FREQ minutes. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\gw_head.####.asc" **
GW_RECHARGE_INC [value]	filename or folder	Filename to output MAP_TYPE maps of groundwater recharge (cm) since last map output every MAP_FREQ minutes. If MAP_TYPE=0, then [value] is a folder name and output files are called "value\gw_head.####.asc" **