Difference between revisions of "Project File:Subsurface Drainage Network – Optional"
From Gsshawiki
(Created page with "==3.12.1 Required Inputs== The following cards are REQUIRED for the simulation of subsurface drains. {| class="thin" width=700px |- ! Card !! Argument !! Description |- | ...") |
(No difference)
|
Revision as of 21:27, 11 July 2013
Contents
3.12.1 Required Inputs
The following cards are REQUIRED for the simulation of subsurface drains.
| Card | Argument | Description |
|---|---|---|
STORM_SEWER |
filename.spn | Card specifies that subsurface drainage be performed and identifies the input file that describes the newtork connectivity and physical description. |
3.12.2 Optional Inputs
The following cards are REQUIRED for the simulation of subsurface drains.
| Card | Argument | Description |
|---|---|---|
GRID_PIPE |
filename.gpi | File that contains the information needed to link the network to the groundwater model. Required when simulating tile drains. |
HIGH_HEAD_RELEASE |
none | Allow flow back to the overland from the storm drains during system surcharge. |
SUPERLINK_C_OPT |
none | Specifies that GSSHA assigns the proper node spacing for within superlinks. |
SUPERLINK_DRAINMOD |
none | Specifies the method used in DRAINMOD be used to compute flows into tile drains. |
3.12.3 Output Cards
The following cards are REQUIRED for the simulation of subsurface drains.
| Card | Argument | Description |
|---|---|---|
SUPERLINK_JUNC_LOCATION |
filename | File that defines the junctions for output. |
SUPERLINK_NODE_LOCATION |
filename | File that defines the nodes for output. |
SUPERLINK_JUNC_FLOW |
filename | File that contains the time series ouput data for the junctions listed in SUPERLINK_JUNC_LOCATION. |
SUPERLINK_NODE_FLOW |
filename | File that contains the time series ouput data for the nodes listed in SUPERLINK_NODE_LOCATION. |
GSSHA User's Manual
- 3 Project File
- 3.1 Required Inputs
- 3.2 Mapping Table – Optional
- 3.3 Overland Flow – Required
- 3.4 Interception – Optional
- 3.5 Rainfall Input and Options – Required
- 3.6 Infiltration – Optional
- 3.7 Channel Routing – Optional
- 3.8 Continuous Simulations – Optional
- 3.9 Saturated Groundwater Flow – Optional
- 3.10 Soil Erosion – Optional
- 3.11 Constituent Transport – Optional
- 3.12 Subsurface Drainage Network – Optional
- 3.13 Output Files – Required
