Snow Card Inputs - Optional

The following tables list all project file cards pertaining to snow accumulation, melt, and melt-water transport. The Hybrid Energy Balance method is the default snow melt method (no additional card required to run this method).

Cards Associated with BOTH Hybrid Energy Balance and Temperature Index Methods

Card	Argument	Units	Description
NWSRFS_FR_USE ##.##	real	fraction	Specifies the fraction of precipitation in the form of rain when temperature drop below MBASE.
NWSRFS_TIPM ##.##	real		Snow Cover Thermal Gradient
NWSRFS_NMF ##.##	real	mm/°C/dt	Negative Melt Factor.
NWSRFS_FUA ##.##	real		Empirical Wind Function Factor.
NWSRFS_PLWHC ##.##	real	%	Percent Liquid Water Holding Capacity.

GSSHA User's Manual

3 Project File

3.1     Required Inputs

3.2     Mapping Table – Optional

3.3     Overland Flow – Required

3.4     Interception – Optional

3.5     Rainfall Input and Options – Required

3.6     Infiltration – Optional

3.7     Channel Routing – Optional

3.8     Continuous Simulations – Optional

3.9     Saturated Groundwater Flow – Optional

3.10     Soil Erosion – Optional

3.11     Constituent Transport – Optional

3.12     Subsurface Drainage Network – Optional

3.13     Output Files – Required