Difference between revisions of "Project File:Subsurface Drainage Network – Optional"

From Gsshawiki
Jump to: navigation, search
(Created page with "==3.12.1 Required Inputs== The following cards are REQUIRED for the simulation of subsurface drains. {| class="thin" width=700px |- ! Card !! Argument !! Description |- | ...")
(No difference)

Revision as of 21:27, 11 July 2013

3.12.1 Required Inputs

The following cards are REQUIRED for the simulation of subsurface drains.

Card Argument Description
STORM_SEWER
filename.spn Card specifies that subsurface drainage be performed and identifies the input file that describes the newtork connectivity and physical description.

3.12.2 Optional Inputs

The following cards are REQUIRED for the simulation of subsurface drains.

Card Argument Description
GRID_PIPE
filename.gpi File that contains the information needed to link the network to the groundwater model. Required when simulating tile drains.
HIGH_HEAD_RELEASE
none Allow flow back to the overland from the storm drains during system surcharge.
SUPERLINK_C_OPT
none Specifies that GSSHA assigns the proper node spacing for within superlinks.
SUPERLINK_DRAINMOD
none Specifies the method used in DRAINMOD be used to compute flows into tile drains.

3.12.3 Output Cards

The following cards are REQUIRED for the simulation of subsurface drains.

Card Argument Description
SUPERLINK_JUNC_LOCATION
filename File that defines the junctions for output.
SUPERLINK_NODE_LOCATION
filename File that defines the nodes for output.
SUPERLINK_JUNC_FLOW
filename File that contains the time series ouput data for the junctions listed in SUPERLINK_JUNC_LOCATION.
SUPERLINK_NODE_FLOW
filename File that contains the time series ouput data for the nodes listed in SUPERLINK_NODE_LOCATION.



GSSHA User's Manual

3 Project File
3.1     Required Inputs
3.2     Mapping Table – Optional
3.3     Overland Flow – Required
3.4     Interception – Optional
3.5     Rainfall Input and Options – Required
3.6     Infiltration – Optional
3.7     Channel Routing – Optional
3.8     Continuous Simulations – Optional
3.9     Saturated Groundwater Flow – Optional
3.10     Soil Erosion – Optional
3.11     Constituent Transport – Optional
3.12     Subsurface Drainage Network – Optional
3.13     Output Files – Required