Search results

...del, and post-processing. The [[Building a Model:Building a GSSHA Model|''GSSHA User’s Manual'']] (Downer and Ogden in preparation) provides detailed inf ...n and grid generation from digital elevation data as well as data exported from the ''GRASS'' or ''Arc/Info'' GISs.

...check the DEM with topographic maps of the area. Interpolating elevations from the DEM at one resolution to a computational grid with cells of coarser res ...lower than its four neighbors are marked. Toggling the cell display option from smooth to blocked helps to visualize the problem cells as well.

...ore than the extension. The extensions shown here are the defaults used in WMS, but they are not fixed. Filenames or paths, if they contain spaces, should A GSSHA project file always begins with the same header

...each wash size sediment, sand load flux (m3/s) for each wash load sediment from the overland plus an additional column for the sand deposited in the channe ...each wash size sediment, sand load flux (m3/s) for each wash load sediment from the overland plus an additional column for the amount deposited in the chan

* '''WMS Version 8.1 and later''' * '''GSSHA Version 3.0b and later'''<br><br>

* '''WMS Version 8.1 and later''' * '''GSSHA Version 3.0b and later'''<br><br>

* '''WMS Version 8.1''' * '''GSSHA Version 3.0b and later'''<br><br>

* '''WMS Version 8.1 and later''' * '''GSSHA Version 3.0b and later'''<br><br>

== GSSHAâ„¢ Executable Installation Downloads == ...ey are not supported and may not be compatible with the current version of WMS. The most current versions of the model are located at the top of the page

Batch mode is designed for running many different run of the same basic model but each run having a few differ ...s the name of the values file. If it is desired to run a single simulation from the many that have been set up, you can put

* '''WMS Version 8.2 and later''' * '''GSSHA Version 3.0b and later'''<br><br>

...d other input and output files, is the only direct input required to run ''GSSHA''. ...that causes the combined path and file name to exceed 128 characters, then GSSHA will not run.

* '''WMS Version 8.2 and later''' * '''GSSHAâ„¢ Version 4.0 and later'''<br><br>

* '''WMS Version 8.2 and later''' * '''GSSHA Version 5.0 and later'''<br><br>

* '''WMS Version 8.2 and later''' * '''GSSHA Version 5.0 and later'''<br><br>

...ut all default output files. Default is directory where GSSHA is executed from. If you use this card, all path names in your project file should be relat ...each wash size sediment, sand load flux (m3/s) for each wash load sediment from the overland plus an additional column for the sand deposited in the channe