Surface Water Routing:Overland Routing with BMPs

From Gsshawiki
Revision as of 02:30, 2 October 2023 by Aabyrd (talk | contribs)

Jump to: navigation, search

GSSHA has the ability to simulate sub-grid scale best management practice features. These are considered point features that alter the hydrology of the cell they are in.

5.9.1 Simulating BMPs in GSSHA

Point models of small scale features are simulated in GSSHA as part of a sub-grid BMP Calculator. They are included as a point solution within a grid cell (or other discrete unit). The Point solution is added to the solution at the grid cell to get the total cell response.

Point models affect the volume and timing of flow, sediment, and constituents. The control volume approach allows a wide range of BMPs to be simulated while using a common approach.

BMP Control volume.jpg

Essentially, the computed overland flow volume without BMPs is routed through the BMP, which then modifies the overland flow. The result is returned to the cell. A cell can have multiple BMPs. The outflow from one BMP is routed to the next in series.

500px


5.9.2 Including BMPs in a GSSHA Project

To include BMPs in a project, 1) include the OV_BMP card in the project file and 2) include the BMP table in the mapping table file.


GSSHA User's Manual

5 Surface Water Routing
5.1     Channel Routing
5.2     Overland Flow Routing
5.3     Channel Boundary Conditions
5.4     Overland Boundary Conditions
5.5     Embankments
5.6     Overland/Channel Interaction
5.7     Introducing Discharge/Constituent Hydrographs
5.8     Overland Routing with Snow
5.9     Overland Routing with BMPs