Search results

Page title matches

• Running GSSHA:Project file
  ...necessary parameters required for the desired options. An example project file is shown below:
  1 KB (204 words) - 21:07, 21 June 2008
• ...re>CONTAM_MAP filename</pre> || ''file name'' || Kg or mg/Kg || &nbsp; || File name that contains map of contaminant loadings (Kg), or soil concentration ...LOCATION "filename.ocl"</pre> || ''file name'' || ppb || &nbsp; || Output file containing columns, first of time then constiuent concentration (ppb) for e
  3 KB (429 words) - 18:53, 25 February 2009
• Project File:Output Files – Required
  #REDIRECT [[Project File:Output Files – Required]]
  52 bytes (6 words) - 18:53, 25 February 2009
• | <pre>CHANNEL_INPUT "filename.cif"</pre> || ''file name'' || Input ASCII file containing channel network connectivity and cross-sectional information for | <pre>STREAM_CELL "filename.gst"</pre> || ''file name'' || Input ASCII file containing channel/grid connectivity information.
  8 KB (1,142 words) - 18:11, 5 April 2013
• File Formats:Project File Format
  ...hat processes run, when they run, and what output is returned. The project file references many other files. These files often differ in name by not much m ...nts. Please refer to Chapter 3 of the Manual, which describes the project file, and projects cards in detail.
  26 KB (3,971 words) - 14:55, 13 October 2023
• Project File:Project File
  ...that contains integers indexed to tabular values. Throughout the manual, project card names will be presented in '''BOLD CAPITAL''' letters; arguments appea ...rameter values for any process, the '''MAPPING_TABLE''' card is used. For project cards related to input parameters the units, if any, of the input argument
  1 KB (245 words) - 17:01, 2 July 2008
• Project File:Required Inputs
  ...e lists all required project file card, which must be present in a project file. In addition to these cards, a method of assigning rainfall and overland r ...SHAPROJECT</pre> || ''none'' || This card must appear first in the project file
  2 KB (351 words) - 05:32, 22 July 2008
• | <pre>WATER_TABLE "filename.wte"</pre> || ''file name'' || &nbsp; || Specifies the simulation of the effect of the water tab | <pre>AQUIFER_BOTTOM "filename.bot"</pre> || ''file name'' || name || Name of GRASS ASCII map of bedrock elevations (m).
  6 KB (902 words) - 20:30, 19 June 2013
• | <pre>MAPPING_TABLE "filename.cmt"</pre> || ''filename'' || Input ASCII file that assigns grid-based parameter values based on grid index maps. | <pre>ST_MAPPING_TABLE "filename.smt"</pre> || ''filename'' || Input ASCII file that assigns link/node parameter values based on stream index maps.
  512 bytes (73 words) - 18:48, 25 February 2009
• ...r of these cards if roughness values are to be read from the Mapping Table file. ...ire watershed. Mutually exclusive with '''ROUGHNESS''' and Mapping Table file assignment.
  3 KB (447 words) - 16:33, 14 August 2009
• .../pre> || &nbsp; || Do interception using data present in the Mapping Table file. ...tial interception abstraction (mm). Mutually exclusive with Mapping Table file assignment.
  715 bytes (96 words) - 18:49, 25 February 2009
• ...ot both, PRECIP_UNIF or PRECIP_FILE must be included in each GSSHA project file. ...decoration: underline">Precipitation Input</font> for a description of the file format. Mutally exclusive with '''PRECIP_UNIF'''.
  2 KB (344 words) - 20:26, 5 August 2009
• ...ormats, and the appropriate distributed data either from the Mapping Table file or from GRASS ASCII maps. | <pre>HMET_SURFAWAYS "filename.hmt"</pre> || ''file name'' || ASCII file with hourly HMET data formatted in the form of the NOAA/NCDC Surface Airway
  12 KB (1,819 words) - 17:07, 21 December 2012
• ...sture are required. Parameter values may be input using the Mapping Table file or with the series of GRASS ASCII maps using the cards below. ...'GREEN_AMPT''' or '''INF_REDIST'''. Mutually exclusive with Mapping Table file assignment.
  9 KB (1,226 words) - 19:40, 25 June 2010
• Project File:Channel Routing – Optional
  #REDIRECT [[Project File:Channel Routing – Optional]]
  55 bytes (6 words) - 18:51, 25 February 2009
• | <pre>OUTLET_SED_FLUX "filename.osf"</pre> || ''file name'' || Output file name for outlet sediment flux (cms). Output is listed in columns, first be ..._ELEV "filename.ele"</pre> || ''file name'' || &nbsp; || &nbsp; || Output file containing the final elevations due to erosion and deposition. Inclusion o
  3 KB (433 words) - 18:22, 29 July 2009
• | <pre>SUMMARY "filename.sum"</pre> || ''file name'' || Output file summarizing information on options selected, inputs read, simulation result | <pre>OUTLET_HYDRO "filename.otl"</pre> || ''file name'' || Output file containing time series discharge at the catchment outlet. (m³/s
  11 KB (1,753 words) - 16:52, 24 June 2013
• Creating Project Files:Simple Project File
  For this project file example, we use an invented watershed data set. The topography of the wate ...t begin with the pound sign are comments, which are allowed in the project file.
  4 KB (404 words) - 20:12, 21 July 2008
• Creating Project Files:Involved Project File
  ...file will be called “simple.cip”, with a the channel/grid connectivity file "simple.gst". The format of the channel input files is described in Chapte The resulting project file for this simulation appears as:
  4 KB (502 words) - 20:11, 21 July 2008
• Creating Project Files:Continuous Simulation Project File
  ...ure, and combination land-use/soil-texture maps. In this case the project file would look like. The Mapping Table file ''simple.cmt'' would supply all the needed parameters for overland flow, ET
  4 KB (450 words) - 20:29, 9 September 2008

Page text matches

• Running GSSHA:Running GSSHA from WMS
  ...xecutable, then you will be prompted to locate the file separately using a file browser. ...file before running ''GSSHA'' so that all changes are saved to the project file.
  912 bytes (150 words) - 21:51, 23 September 2008
• Running GSSHA:Running GSSHA from command line
  ''GSSHA'' can also be run from the command line using the project file as the sole command-line argument. For example, from a command prompt wind where simulate.prj is the name of the project file saved from ''WMS'' and resides in the same directory as ''GSSHA.exe''. You
  716 bytes (124 words) - 14:51, 17 April 2008
• Running GSSHA:Project file
  ...necessary parameters required for the desired options. An example project file is shown below:
  1 KB (204 words) - 21:07, 21 June 2008
• GSSHA Primer
  ==Project file== {{:Running GSSHA:Project file}}
  5 KB (532 words) - 19:56, 7 October 2008
• Gridded Surface Subsurface Hydrologic Analysis
  ...one on the wiki, which has the latest information on GSSHA™ features and file formats. ...es are placed in a directory with a path that causes the combined path and file name to exceed 128 characters, then GSSHA will not run.
  9 KB (1,316 words) - 15:18, 10 October 2023
• | <pre>CHANNEL_INPUT "filename.cif"</pre> || ''file name'' || Input ASCII file containing channel network connectivity and cross-sectional information for | <pre>STREAM_CELL "filename.gst"</pre> || ''file name'' || Input ASCII file containing channel/grid connectivity information.
  8 KB (1,142 words) - 18:11, 5 April 2013
• File Formats:Project File Format
  ...hat processes run, when they run, and what output is returned. The project file references many other files. These files often differ in name by not much m ...nts. Please refer to Chapter 3 of the Manual, which describes the project file, and projects cards in detail.
  26 KB (3,971 words) - 14:55, 13 October 2023
• File Formats:Time and Elevation Series Files
  ...ies in the project, create it in a text file and include it in the project file using this card: This is the only card that may be repeated in the project file so that you can include as many time series files as needed.
  2 KB (396 words) - 17:49, 20 May 2008
• Model Formulation:Inputs
  ...ut data are used. An ASCII text project file is used to provide the basic project information, select processes to be simulated, assign simulation parameters ...not to specify multiple sources of the same parameter value in the project file. This avoids possible confusion and improper assignment of parameter value
  3 KB (547 words) - 17:40, 19 June 2012
• Project File:Project File
  ...that contains integers indexed to tabular values. Throughout the manual, project card names will be presented in '''BOLD CAPITAL''' letters; arguments appea ...rameter values for any process, the '''MAPPING_TABLE''' card is used. For project cards related to input parameters the units, if any, of the input argument
  1 KB (245 words) - 17:01, 2 July 2008
• Project File:Required Inputs
  ...e lists all required project file card, which must be present in a project file. In addition to these cards, a method of assigning rainfall and overland r ...SHAPROJECT</pre> || ''none'' || This card must appear first in the project file
  2 KB (351 words) - 05:32, 22 July 2008
• Surface Water Routing:Introducing Dischage/Constituent Hydrographs
  ...nt source input file is card based and very similar to the rain gage input file, Section 6.2. ...ABLE''' file. For steady-state point sources this is the end of the input file.
  4 KB (608 words) - 16:45, 22 July 2013
• ...ot both, PRECIP_UNIF or PRECIP_FILE must be included in each GSSHA project file. ...decoration: underline">Precipitation Input</font> for a description of the file format. Mutally exclusive with '''PRECIP_UNIF'''.
  2 KB (344 words) - 20:26, 5 August 2009
• ...ormats, and the appropriate distributed data either from the Mapping Table file or from GRASS ASCII maps. | <pre>HMET_SURFAWAYS "filename.hmt"</pre> || ''file name'' || ASCII file with hourly HMET data formatted in the form of the NOAA/NCDC Surface Airway
  12 KB (1,819 words) - 17:07, 21 December 2012
• ...sture are required. Parameter values may be input using the Mapping Table file or with the series of GRASS ASCII maps using the cards below. ...'GREEN_AMPT''' or '''INF_REDIST'''. Mutually exclusive with Mapping Table file assignment.
  9 KB (1,226 words) - 19:40, 25 June 2010
• | <pre>SUMMARY "filename.sum"</pre> || ''file name'' || Output file summarizing information on options selected, inputs read, simulation result | <pre>OUTLET_HYDRO "filename.otl"</pre> || ''file name'' || Output file containing time series discharge at the catchment outlet. (m³/s
  11 KB (1,753 words) - 16:52, 24 June 2013
• General Considerations:Units
  ...m/h. The particular units expected of each input are given in the project file card descriptions. The discharge hydrograph may be output in cfs by specif
  675 bytes (102 words) - 18:11, 3 July 2008
• General Considerations:Total Event Simulation Time
  ...harge falls below the discharge specified by the '''EVENT_MIN_Q''' project file card. For continuous events the '''EVENT_MIN_Q''' is used only for account
  1 KB (196 words) - 18:20, 3 July 2008
• General Considerations:Map Headers
  ...the value specified in the project file using the '''GRID_SIZE''' project file card, GSSHA will not run. The header in each GRASS ASCII map must be <font
  2 KB (335 words) - 18:22, 3 July 2008
• General Considerations:Watershed Mask
  ...at is approximately the shape of Texas would have the following a mask map file: ...each grid cell in GRASS ASCII format in a file called “maskmap”. This file is useful for deciphering error messages from GSSHA that refer to the grid
  2 KB (293 words) - 20:59, 17 April 2008

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)